PROTHANE™ delivers maximum performance with these precision-made, universal sway bar bushings. The same formulated performance compound found in our other sway bar bushings is used here, giving you superior handling over the stock rubber units. The widest range available to cover all popular applications. Each pair is sold with matching heavy duty brackets to insure a perfect fit, see diagram below for the bracket style that best suits your needs.

Universal Greaseable Sway Bar Bushings

PROTHANE™ Universal Greaseable Sway Bar Bushings offer you another choice for your sway bar bushing needs. Complete with precision grease fittings and unique contoured groves to hold in the grease. Our greaseable sway bar bushings offer easy lubrication without the need for disassembly. Each pair includes heavy duty brackets to insure a perfect fit. See diagram below for the bracket style that best suits your needs.

PROTHANE™ If your vehicle uses standard length end links, use this guide to find the correct kit, With the car level (not jacked up), check to makesure stabilizer bar and control arm are parallel (B and C), Now,measure distance “A" (front center of stabilizer bar to control arm) and com-are length to application chart to find your end links and part number.

These End Link Bushings Only kits are designed for those who don’t feel the need to upgrade all their existing OEM hardware but would like the enhanced performance that only urethane offers.We also offer one kit with washers.Measure your vehicle to determine which kit best suits your neds.

PROTHANE™ Coil Spring Dampening Inserts are available in five (5) heights, so stacking is a practice of the past.These inserts prevent suspension bottoming and add a progressive compression rate to coil springs.Dampening inserts,when installed should be from 1 to 3 inches less in height than the springs installed height on Chevrolet vehicles,3/4 to 1 1/2 inches less for Dodge vehicles and 2 to 3 inches less for Ford vehicles.Specially formulated nonrebound polyurethane inserts offer yet another aspect to your suspension tuning by eliminating the amount of rebound after compression.

PROTHANE™ Pivot Bushing Kits fit most common 4-bar systems, yet offers a multitude of universal applications. Each set includes 4 bushings and 2 sleeves.

These Shock Reservoir Mounts provide a dampening effect in between the remote shock absorber reservoir and the mounting tube. Available in various sizes from 1.500" to 3.000 “ to accommodate all popular tube sizes.

Protect Tie Rod End Joints from dirt, sand, water and snow. Retains lubrication better than rubber because Hi-Tech Urethane will not deteriorate from grease. For the correct size: Measure tie rod end at the largest diameter of tapered shaft, and also at the other diameter of the tie rod socket. Select a boot which is that size or a little smaller. Sold 2 per set.

Help protect your tricked-out chassis from “jack assault" with these trick Jackpads™. You’ve spent a lot of time and money painting and detailing your chassis and drive line. Don’t allow your jack to destroy your efforts. Specially formulated soft urethane pad simply fits over the top of your jack or jack stand.